mechanical press
美 
英
- un.机械压力机；机动压榨机；机械压床
- 网络机力压机；机械式压力机；机械夹具
英汉解释
例句
Finally, mechanical press is carried on the movement simulation design, observed the work process, examined the design accuracy.
最终对机械压机进行运动仿真设计，观察工作过程，以检验设计的正确性。
Mechanical press is a machine which converts inner materials to final product through high-temperature high press processing.
机械压机是将原料放入压机内，经过高温高压加工，转变为最终产品的机器。
and then carrying out molding and pre-sintering, carrying out mechanical press-fitting and the sintering-soldering, and finally carburizing.
接着进行成形和预烧结，然后进行机械压配和烧结焊，最后进行渗碳即可。
The necessity of the piston's displacement measurement online of the clutch of the mechanical press is pointed out.
指出了对机械压力机离合器活塞位移在线测量的必要性。
Mechanical press can be divided into the components and the parts.
将压机整体分为零件和部件两层结构。
HIGH QUALITY: Six layers type staightener, high rigid mechanical press, advanced stack system, etc, ensure the high quality.
高品质：六重式校平机，高刚性的机械压力机，先进的自动码垛系统等，保证了产品的高质量。
The hybrid-driven mechanical press in this thesis is an improved mechanical press based on 2-DOF seven bar mechanism.
本文研究的混合驱动压力机是基于平面二自由度七杆机构的一种改进压力机。
Computer Simulation of a Programmable Controller Control for the Mechanical Press
机械压力机可编程控制器控制计算机模拟软件的研制
Study on the characteristics of a hydraulic overloading protective device for mechanical press
一种机械压力机液压超载保护装置的卸载规律的研究
Investigation for Rational Structure of Rotary Joints Used in the Pneumatic Friction Clutch of a Mechanical Press
机械压力机气动摩擦离合器用旋转接头合理结构的探讨
Emulation Communication Software for Programmable Controller Control of the Mechanical Press
机械压力机可编程控制器控制的仿真通信研究
a plurality of processes can be completed on one mechanical press, thus reducing the cost of the equipment;
可以在一台机械压力机上完成多道工序，降低了设备成本；
Investigation on a new type of mechanical press with flexible and controllable transmission mechanism
新型柔性可控传动机构的机械压力机研究
Research of the High Speed and Anti-jamming Programmable Cam Controller of Mechanical Press
一种用于机械压力机的高速、抗干扰可编程凸轮控制器的研制
Dynamic Analysis and Simulation of Hybrid-Driven Mechanical Press for Precision Drawing
混合驱动精压机的动力学分析与仿真
Study on the forward kinematics analysis of the hybrid-drive mechanical press
混合驱动压力机正运动学分析的研究
Optimum Design and Simulation of Hybrid-Driven Mechanical Press for Precision Drawing
混合驱动精压机的优化设计和运动仿真
Application of Iterative Learning Method in the Slide Position Control of Mechanical Press
迭代学习法在机械压力机滑块位置控制中的应用
Optimum Design of a New Hybrid Input Mechanical Press
新型混合输入式曲柄压力机械的优化设计
Optimum Synthesis and Simulation of Hybrid-Driven Mechanical Press for Deep Drawing
混合驱动拉深压力机运动学优化综合与仿真
Emulational hardware and software investigation for PLC control of the mechanical press
机械压力机PLC控制仿真软、硬件的研制
Identification and Modeling of the Pneumatic System of the Mechanical Press
机械压力机气动系统模型的建立
Probing into Reasonableness of Direct Driving Mode of AC Servo Motor of Mechanical Press
机械压力机交流伺服电动机直接驱动方式合理性探讨
Study on the dynamic analysis of the hybrid-drive mechanical press
混合驱动压力机动态静力分析研究
Present Status of Safety Protection Devices of Mechanical Press
压力机械的安全保护装置的现状
Optimum Design of the Mechanical Press with Low-Speed and Stamping-Punch Mechanism Based on Genetic Algorithm
机械压力机低速锻冲机构的遗传算法优化设计
Application of LOCTITE adhesives in mechanical press
乐泰胶在大型机械压力机制造中的应用
Deficiency and Betterment in Mechanical Press Design
机械压力机设计中的缺陷与改进
Research on the Feasibility of Hybrid-Driven Mechanical Press
混合驱动压力机的可行性研究
PC Control of the Operation Methods of Mechanical Press
机械压力机操作规范的计算机控制
Design of Slider Curve for the Hybrid-driven Mechanical Press
混合驱动压力机滑块运动规律的设计
The application of combined cam mechanism in mechanical press
凸轮组合机构在压力机上的应用
On-line Monitoring for Dynamic Parameters of Mechanical Press
机械压力机工作状态在线监控的研究
Probing into Inspection of Safety Quality of Mechanical Press
机械压力机产品安全质量检验方法浅析
Automatic mechanical press for hot printing
热印用自动机械热压机
Open back inclinable mechanical press
后开式可倾机械压床
Development of AC Servomotor Driving Mechanical Press
交流伺服电机驱动机械式压力机的发展
Optimum Design of Hybrid-driven Mechanical Press Based on Forward Kinematics Analysis
基于正运动学分析的混合驱动压力机优化设计
Rolling key clutches for mechanical press
机械压力机用主轧制离合器
Study on Transmission System of Mechanical Press Driven by Two Motors
机械压力机双电机驱动传动系统研究
